Input Voltage: 110-240VAC, 50-60 Hz
Input Current: 1.1A
Bulk Charge Voltage: 14.4V
Bulk Charge Current: 3.3A
Ripple Current: <0.13A rms
Connector: Insulated Alligator Clamps
Size: 5.91" L x 2.76" W x 2.19" H
Enclosure: Ip54 (Dust protected, water splashing resistance)
Battery Capacity: 7-80Ah
Battery Type: All types of 12V LifePO4 Batteries
How to use:
1. Connect the AC cord to AC outlet. The “power” LED will light on solid.
Connect positive charger clip (red) to positive battery terminal, the
black clip to negative. The “25%~100%” LEDs will light in a sequence. If
the batteries polarity is reversed or output is shorted, all LEDs will
flash simultaneously, DISCONNECT & CHECK.
3. Depending on the
charged capacity, 25%~100% LEDs will light up solid. When all are ON,
the battery is fully charged. You can disconnect the battery to use OR
keep it connected to charge in float mode. If battery stays at Stage 2
after 24 hours of charging, then the battery is defective.